Konica Minolta bizhub pro 1050 User Manual page 313

Touch Stapling and select stapling style and position.
The Stapling Selection Screen appears.
Touch any stapling position key to select it.
If you touch Cancel, it returns to the previous setting.
If you touch Function Off, stapling output will be turned off but the stapling
position will be kept in memory.
3.
Touch OK.
It will return to the Output Application Screen.
4.
Touch OK on the Output Application Screen.
The icon of the specified output application appears on the Copy Screen.
The primary (main) tray gradually goes down while printed materials output.
DO NOT allow any object to interfere with the operation of the tray on the left
side of the finisher, as any interference may cause damage to the finisher.
Be careful not to exceed the finisher tray capacity when selecting the print
quantity, otherwise unexpected trouble may be caused.
Using Finisher FS-503 (continued)
12-17