Positioning originals in Z-Folded original mode
Z-Folded original mode detects the folded original size without using the size
detection sensor of the ADF.
To use the Z-Folded original mode, see procedure on p. 9-12.
1.
Arrange originals in order.
2.
Position original(s) FACE UP in the document feeder tray.
Place two-sided originals with page one FACE UP.
Up to 100 originals can be set at a time.
• Before placing originals in the tray, be sure the document feeder is closed
fully. Once closed, do not open the document feeder, otherwise the
selected copy conditions may be altered automatically.
• Be sure not to use unsuitable ADF originals. See p. 3-9 for details.
3.
Adjust paper guides.
Positioning Originals (continued)
8-13