Konica Minolta bizhub pro 1050 User Manual page 3

bizhub PRO 1050/1050e
Auto Low Power
This function conserves energy by lowering the set temperature of the fixing unit. In
the standard setting, Auto Low Power operates automatically when 15 minutes have
elapsed after completion of the last copy, with the copier remaining in the ready to
copy state during that time.
The time period for the Auto Low Power function can be set for 5 minutes, 10
minutes, 15 minutes, 30 minutes, 60 minutes, 90 minutes, 120 minutes, or 240
minutes.
Automatic Shut-Off
This function achieves further energy conservation by partially turning the power
supply OFF, thereby reducing energy consumption to 105 W or less. In the standard
setting, Automatic Shut-Off follows Auto Low Power, operating automatically when 90
minutes have elapsed after completion of the last copy, with the copier remaining in
the ready to copy state during that time.
The time period for the Automatic Shut-Off function can be set for 30 minutes, 60
minutes, 90 minutes, 120 minutes or 240 minutes.
Automatic Duplex Copying
To reduce paper consumption, use this function to make double-sided (duplex)
copies, automatically.
Combination
To reduce paper consumption, this function can also be used to lay out and copy a
fixed number (2, 4, or 8) of pages onto one sheet of copy paper.
We recommend that you utilize the Auto Low Power function, Automatic Shut-Off
function, Automatic Duplex Copying function, and Combination function.
E S
®
NERGY TAR
E S
The NERGY TAR Program has been established to
encourage the widespread and voluntary use of energy-
efficient technologies that reduce energy consumption
and prevent pollution. As an
we have deter mined that this product meets the
E S
NERGY TAR guidelines for energy efficiency, based
on the following features.
Program
E
NERGY
User's Guide
S
TAR Partner,