Konica Minolta bizhub pro 1050 User Manual page 86

Adding Paste Pellet to Perfect Binder PB-501
If the Perfect Binder PB-501 is out of paste pellets, the machine warmup cannot be
completed with the following message displayed on the Machine Status Screen, and
consequently the binding operation is unavailable.
When the paste pellets run out during the binding operation, the machine stops the
job immediately and the binding operation also becomes unavailable.
• Be sure to use the paste GC-501 exclusively provided for Perfect
Binder PB-501.
• Handle melted hot paste with great care. To ensure safety and product
reliability, observe the precautions for using paste pellets. Read p. 1-7
as well.
• Do not overload the paste hopper with paste pellets.
• Do not touch the lever in the paste hopper with your hand to avoid
breakdown.
• Be sure to loosen the paste pellets inside the bag before adding them.
If paste pellets stick inside the paste hopper, see p. 5-4 for details.
1.
Loosen the paste pellets inside the bag.
4-16