Using Post Inserter On Folding Unit Fd-501 - Konica Minolta bizhub pro 1050 User Manual

Using Post Inserter on Folding Unit FD-501 (continued)
1.
Place paper on the upper and lower trays of the post inserter.
Do not load more than 500 sheets (20 lb) for each of the upper and lower
trays. Do not load above the load limit line on the guide plate.
2.
Use the sheet insertion or booklet function to place a cover sheet.
Copies will be delivered to the primary (main) tray of Finisher FS-503. Be
careful not to exceed the finisher tray capacity when selecting the print
quantity, otherwise unexpected trouble may be caused.
To prevent small cover sheet from skewing
The small cover sheet may be skew, when loading it in the upper/lower tray of the
post inserter.
Three paper rollers are attached to the upper/lower tray respectively.
To lock the roller both sides, prevent paper from skewing.
Push the both roller lock levers to inside to lock them.
Be sure to lock both sides, when locking the paper rollers.
Do not lock the paper rollers normally.
Upper tray
Lower tray
12-35