Konica Minolta bizhub pro 1050 User Manual page 347

5.
Specify the cover print setting.
This setting is available when one of the tray 1 to 5 is specified as the cover
tray source.
Select On to print on covers, or Off to attach blank covers.
Also select Simplex to print only on the front side, or Duplex to have both
front and back sides printed.
For details of finished result with each setting specified, see page 12-41 to p.
12-42. The original image to be printed on cover varies depending on whether
the original count is odd or even.
6.
Specify the spine width.
Touch Spine Width (1-30 mm) to display the Spine Width Screen.
Use the screen keypad, arrow keys ▲ and ▼, or the control panel keypad to
enter the desired value, then touch OK.
Using Perfect Binder PB-501 (continued)
12-51