Positioning Originals; Positioning Originals In Adf - Konica Minolta bizhub pro 1050 User Manual

Positioning Originals

Positioning Originals in ADF

The document feeder (ADF) automatically feeds up to 100 originals directly to the
original glass area, starting with the top sheet. The ADF should only be used for
unstapled, smooth, flat originals.
Positioning originals in Normal mode
1.
Arrange originals in order.
• Before placing originals in the tray, be sure the document feeder is closed
fully. Once closed, do not open the document feeder, otherwise the
selected copy conditions may be altered automatically.
• Be sure not to use unsuitable ADF originals.
2.
Position original(s) FACE UP in the document feeder tray.
Place two-sided originals with page one FACE UP.
Up to 100 originals can be set at a time.
Do not set more than 100 originals or over the limit line indicated on the paper
guides; otherwise a paper misfeed will occur.
If the number of originals exceeds 100, divide them into blocks not exceeding
100 sheets, then load them from the block with the first page.
3.
Adjust paper guides.
8-11