F -Code Polling - Muratec F-65 Operating Instructions Manual

Beyond the basics
Enter Password
then it will show:
_
Note: If you know that this subaddress does not have a password, skip to
step 7.
6
Use the numeric keypad to enter the appropriate password.
In this example, we enter 654321.
654321_
7
Press . The shows briefly:
ENTER LCD
Enter Fax Number
then it will show:
_
8
Enter the fax number either by pressing a one-touch key, entering a speed-
dial number or dialing from the numeric keypad.
Do not press .
START
9
What you do now depends upon when you want the transmission to begin.
• To have it begin now, skip to step 12.
• To delay it, proceed to step 10.
10
Press - ,
COM OPTIONS COM
Time: 15/17:05
11
Use the numeric keypad to enter the day and time when the transmission
should begin, then press
12
Press .
START
If you chose an immediate transmission in step 9, your fax machine will begin
dialing. If you chose a delayed command, the machine will display
" ** Reserved ** " on the
command in memory and will perform it later.
Note: The - subaddress and password can be up to 20 characters in length and
ITU T
can include any combination of numbers and the * and # symbols. Do not
include other non-numerical characters.
2.26
- , . The shows:
OPTIONS ENTER LCD
.
ENTER
, indicating that the machine has stored the
LCD
Note: To change a number you have already entered:
— Press to move the cursor to the left or
that character.
— Press to erase the character.
CANCEL
— Enter the digit(s) you want.
-code polling
F
Polling with - subaddress / password:
ITU T
1
Press - six times.
COM OPTIONS
6.F-Code Polling
2
Press . The shows briefly:
ENTER LCD
Enter SubAddress
then it will show:
_
3
Use the numeric keypad to enter the appropriate subaddress.
In this example, we enter 123456:
123456_
4
Press . The shows briefly:
ENTER LCD
Enter Password
then it will show:
_
5
Use the numeric keypad to enter the appropriate password number.
In this example, we enter 654321.
654321_
Note: If you know that this sub-address does not have a password, skip to
step 6.
to move it to the right, to