Table of Contents
Advertisement
11
Depending on whether you already have an
-code box, the
shows briefly:
F
LCD
03:Password
then it will show either:
_
The machine is asking for your
This is the password for
-
-compatible
ITU
T
.
. code for your machine. If you set the password, a caller must know and
I
D
use it in order to send a fax to you via
Note: You do not need a password to use the
password will make your
If you want to enter or change this box's
If you do not want to enter or change this box's
12
Use the numeric keypad to enter this box's
This password can be up to 20 characters in length and can include any com-
bination of numbers and the * and # symbols (but no other non-numerical
characters). Here, we enter 135 * 7#9.
135 * 7#9_
Note: To erase previously entered numbers, press
left. Or to change just one character in the number, press
the cursor to the left, or
and press
to erase it. Then re-enter until the number is just
CANCEL
as you want it.
-
password entered for your
ITU
T
or
123456_
-code box's password.
F
-code fax transactions. (It is not an
F
-code communication.
F
-code box. However, using a
F
-code communications much more secure.
F
-
password, proceed to step 12.
ITU
T
-
password, skip to step 13.
ITU
T
-
-compatible password.
ITU
T
to erase to the
CANCEL
to move it to the right, to that character
13
Press
ENTER
the document.
Hold Time
Use the numeric keypad to enter a two-digit number indicating how long, in
number of days (00-31), you want your fax machine to keep received docu-
ments in this
Hold time
Note: Your fax machine can normally store incoming documents in
boxes (up to the limits of its memory) as long as 31 days, after which
it automatically erases the documents. But if your machine has plenty
of memory, you may want to override the 31-day limit to keep the doc-
uments indefinitely. If so, enter 00.
14
Press
ENTER
I.D. Code
The machine is asking for your
After you set this
view or modify the settings for this
You will also have to enter this
code box or to erase this
to move
To enter or change this
If this is a previously created box and you do not want to change this
skip to step 17.
15
Decide upon a four-digit
code down, and put it in a safe place.
Note: You cannot use 0000 as an
16
Use the numeric keypad to enter the four-digit
Here we enter 2468:
I.D. Code
17
Press
ENTER
To create or modify another
To finish, press
. The machine then asks for the number of days you want to store
:00
-code box. Here, we enter 0, 9, for nine days:
F
:09
to save the settings. The display now shows:
:0000
-code box's four-digit security
F
.
. code, you will have to enter it each time you want to
I
D
-code box (see step 5, page 2.21)
F
.
. code to print documents received in this
I
D
-code box.
F
.
. code, proceed to step 15.
I
D
.
. code (0001-9999) for this
I
D
.
. code.
I
D
.
I
:2468
to save the information.
-code box, repeat steps 4-17.
F
.
STOP
Beyond the basics
-code
F
.
. code.
I
D
-
F
.
. code,
I
D
-code box. Write this
F
. code for this
-code box.
D
F
2.23
Advertisement
Table of Contents
