Muratec F-65 Operating Instructions Manual page 13

7
— Press this key to delete characters on the
CANCEL
mands you have entered into the machine.
— When a document is in the document feeder, press this key to
CONTRAST
toggle among normal, dark or light contrast settings. When neither the
nor (light-emitting diode) is glowing, your machine is set for nor-
LIGHT LED
mal contrast.
8
— When a document is in the document feeder, press this key to make
COPY
copies of a document.
— When the machine is in standby mode and there is no document in
FILM
the document feeder, press this key to indicate the amount of ink film
remaining in the machine.
Note: If using the pre-installed starter roll of ink film, the counter will not
accurately show the amount of ink film left in the roll.
E: :F
E: :F
9
— Press this key to review pending fax commands or view
REVIEW COMMANDS
a brief description of delayed commands.
10
— Press this key to begin a manual fax transmission or reception.
START
— If the light is glowing, your fax machine will print a
REPORT REPORT
transmit confirmation report (
ting one transmission at a time by pressing the
the communication, your machine will return to your default
ting. (See page 2.46 for more information.)
11
— An all-purpose "Whoa!" key. Stops the current operation and ejects a
STOP
document from the document feeder.
12
One-touch keys — The keys labeled
nience. You also can use the keys labeled
With the se five program keys, you can teach your machine an advanced
multi-step function just once, then recall the function at any time by pressing
one of these keys.
13
Numeric keypad — Just like the numeric keys on a regular telephone. In
addition to using these keys to dial phone and fax numbers, you can also use
these keys to enter settings for your fax machine.
14
/ — Redials the last number you dialed. In certain operations,
REDIAL PAUSE
it also produces a special pause character which can be useful when dialing
long-distance numbers.
and cancel com-
LCD
= The ink film is full.
= Your machine is almost out of ink film.
). You can override the default report set-
TCR
key. After completing
START
print set-
TCR
– offer one-touch dialing conve-
A O
1– 5 for programmable functions:
P P
15
— Press this key to quickly disconnect from one call and go right to the
FLASH
next one without having to hang up the handset. Also, press this key to
exchange from
16
— Press this key to either place a call on hold or take it off hold.
DARK HOLD
DIALING OPTIONS
bers (see page 2.7).
17
/
MONITOR CALL
tor speaker off or on. When you're sending a fax, this key activates the call
request feature.
18
— Press this key repeatedly to select the receive mode for your fax
RECEIVE
machine. A glowing
, / nor
TEL TEL FAX
ready" mode.
19
/
SPEED DIAL TEL INDEX
This key can also be used to display one-touch and speed-dial entries sorted
alphanumerically, as in a telephone directory.
20
Status indication lights
COMMUNICATION
communicating with another one.
light — If glowing, indicates your fax machine is ready to commu-
PC
nicate using the
light — If glowing, indicates a problem has occurred during
ALARM
fax communication. It's also accompanied by several beeps immedi-
ately after the problem occurs. The light stays on until the machine
prints a Check Message report.
to .
PABX PSTN
— Press this to insert special symbols into telephone num-
— During on-hook dialing, pressing this key turns the moni-
indicates the current receive mode. When neither the
LED
/ is glowing, the machine is set for the "Fax
ANS FAX LED
— Press this key to begin a speed-dialing operation.
light — If glowing, advises you the fax machine is
- feature (see page 2.50).
PC FAX
Getting started
1.5