Call Request - Muratec F-65 Operating Instructions Manual

Some telephone companies provide only a very general description — for example,
"short-short-long" — of their ring patterns. Fortunately, though, your fax has
DRD
eight possible distinctive ring patterns for use with OneLine +
should work with your phone company's
Pattern One complete ring pattern (seconds)
A
0.8 on, 0.4 off
B
0.4 on, 0.2 off, 0.4 on, 0.2 off, 0.8 on, 4.0 off
C
0.3 on, 0.2 off, 1.0 on, 0.2 off, 0.3 on, 4.0 off
D
1.0 on, 0.5 off, 1.0 on, 3.5 ms off
E
0.5 on, 0.5 off, 0.5 on, 0.5 off, 1.0 on, 3.0 off
F
0.5 on, 0.5 off, 1.0 on, 0.5 off, 0.5 on, 3.0 off
G
0.4 on, 0.6 off, 0.4 on, 4.6 off
H
1.5 on, 0.5 off, 0.5 on, 3.5 off
I
2 on, 4 off
For example: pattern is 0.3 seconds ringing, 0.2 seconds silent, 1 second ringing,
C
0.2 seconds silent, 0.3 seconds ringing and 4 seconds silent; then it goes back to the
first 0.3-second ring and starts over.
To use on your fax machine:
DRD
1
Contact your phone company and confirm that the phone company has set up
service for you. If possible, also find out which distinctive ring pattern the
DRD
phone company has assigned you.
2
Press , , 1, 8.
PROGRAM J
Set DRD
3
Press . The shows:
ENTER LCD
DRD:Off
If you see the setting you want, skip to step 5.
If not, go on to step 4.
4
To change the setting, press
appears. Here, we chose On.
DRD:On
. One of them
DRD
service. This chart lists the patterns:
DRD
or once or twice until the mode you want
5
Press .
ENTER
Ring Pattern: A
6
If " " is the pattern you want, skip to step 8.
A
If not, proceed to step 7.
7
Press or repeatedly until your desired pattern appears (in our example
here, " "):
C
Ring Pattern: C
8
Press to set your machine to the displayed ring pattern.
ENTER
Important: If your telephone company gives you only very general ring pattern
specifications, or if you otherwise encounter a problem while trying to
use your machine's
DRD
patterns. (If you still have a problem after trying all of the patterns,
please call the Muratec Customer Support Center. From the United
States, call 972-364-3350; for the number to call from Canada, check
your in-box documentation).
Important: With your machine set for
other than the one you selected above. To reset the fax so it will
respond once again to normal rings, repeat steps 2–4. But in step 3,
toggle it to "Off." Your fax will now respond normally.

Call request

Wondering why your monitor speaker's activation key is called
Now, we will explain the part of the name. It may be hard to believe, but you
CALL
actually can send or receive a fax message and have a regular phone conversation
on the same call (although, obviously, not at the same time). This is called a call
request. It does not matter whether you are sending the fax or receiving it. You may
fax first and then talk, or talk first and then fax.
Important: For this feature to work, the remote fax machine must have a similar
call-request capability.
Faxing/receiving first, then talking
To send or receive a fax first and then talk:
1
While your fax machine is sending or receiving the fax, press
2
At the remote fax machine, the ringer will ring after that machine receives
each page.
Beyond the basics
feature, please try of the listed ring
ALL
, it won't respond to any ring pattern
DRD
/
MONITOR CALL
MONITOR
?
/ .
CALL
2.47