Muratec F-65 Operating Instructions Manual page 62

6
Press . The shows briefly:
ENTER LCD
Enter Fax Number
then it will show:
_
7
Enter the fax number either by pressing a one-touch key, entering a speed-
dial number or dialing from the numeric keypad. Do not press
8
What you do now depends upon when you want the transmission to begin.
• To have it begin now, skip to step 11.
• To delay it, proceed to step 9.
9
Press - , -
COM OPTIONS COM OPTIONS
The shows the current day and time:
LCD
Time : 15/17:05
10
Use the numeric keypad to enter the day and time when the transmission
should begin, then press
ENTER
Note: If you make a mistake, press
move it to the right, to that character. Then re-enter until the number
is just as you want it.
11
Press .
START
If you chose an immediate transmission in step 8, your fax machine will begin
dialing. If you chose a delayed command, the machine will display
" ** Reserved ** " on the
LCD
command in memory and will perform it later.
Note: The - subaddress and password can be up to 20 characters in length and
ITU T
can include any combination of numbers and the * and # symbols. Do not
include other non-numerical characters).
Note: To change a number you have already entered:
— Press to move the cursor to the left or
that character.
— Press to erase the character.
CANCEL
— Enter the digit(s) you want.
START
, .
ENTER
.
to move the cursor to the left, or
, indicating that the machine has stored the
to move it to the right, to
.
to
Beyond the basics
2.27