Muratec F-65 Operating Instructions Manual page 75

Beyond the basics
3
Use the numeric keypad to enter the four-digit passcode. In our example
here, we enter 6296.
Passcode :6296
Note: If you enter an invalid passcode, the machine's security feature will
abort the operation.
4
Press .
ENTER
PIN Mode: Off
5
If the setting you see is acceptable, skip to step 7.
If not, go on to step 6.
6
To change the setting, press
appears. In this example, we chose "Mode1."
PIN Mode: Mode1
7
Press .
ENTER
Autodialing while using the
Note: The following instructions presume you are familiar with how to set and use
your machine's autodialer. If you need to review, see pages 2.7–2.13.
Note: If the mask feature is off, you use the autodialer normally.
PIN
If you specified "Mode 1"
In this mode, before autodialing a number for the first time, you must add the
its stored one-touch key or speed-dial number. Here's how:
1
Use the EasyDial directory to enter a name.
The shows:
LCD
Passcode : ****
2
Use the numeric keypad to enter the four-digit passcode. Here, we will use
our sample passcode again.
Passcode : 6296
3
Press . The shows briefly:
ENTER LCD
Enter PIN Number
and then it shows:
2.40
or repeatedly until the setting you want
mask
PIN
_
4
Use the numeric keypad (including either * or #, if necessary) to enter the
desired , up to eight characters in length.
PIN
1057_
5
Press to save the
ENTER
Note: If you press
indicates "Invalid Number" on the
Now you may autodial the number as usual.
Important: While in
the . This also applies to autodialer numbers used with
PIN
programmable one-touch keys (see pages 2.28–2.35).
If you specified "Mode 2"
In this mode, you do not have to add the
enter the manually each time you autodial:
PIN
1
Enter a speed-dial number.
Here, we have enter speed-dial number 01:
S01_
2
Press . (If you used a one-touch key, you don't need to press
START
shows briefly:
LCD
to
PIN
Enter PIN Number
and then it shows:
_
The machine now asks for the
3
Use the numeric keypad to enter the
1057_
4
Press . Your machine will dial the number.
ENTER
.
PIN
without entering the , the fax machine beeps,
ENTER PIN
and then returns you to step 4.
LCD
Mode 1, any autodialer numbers you use must include
PIN
to the autodialer setting. Instead, you
PIN
.
PIN
.
PIN
.) The
START