Muratec F-65 Operating Instructions Manual page 57

Beyond the basics
Note: If you enter an invalid
attempt and abort this operation.
6
The now shows briefly:
LCD
01:Box Name
then it will show either:
_ABCDEF >
The machine is now prompting you for a name for this
If you want to enter or change this
If you do not want to enter or change this box's name, skip to step 8.
7
An -code box's name may be up to 16 characters in length. You enter the
F
name the same way you entered your fax name during EasyStart. We will
review the process, here.
On the , you will see the char-
LCD
acter set currently available, such
as:
_ABCDEF >
To find a different character,
press 2 or 8 repeatedly to scroll
through character sets until you
see the one you want.
If you need to insert a space, one
can be found before and after
each set of characters.
When you see the character you want:
• Press either 4 or 6 to move the cursor to the character you want.
• Then press 5 to enter that character and move on to the next entry.
Note: If you make a mistake, just press
continue to enter the character(s) you want.
Note: As you enter characters, the
entries longer than five characters.
2.22
. . code, the fax machine will reject the
I D
or
_ABCDEF > Murat
-code box.
F
-code box's name, proceed to step 7.
F
to erase to the left. Then
CANCEL
will scroll to the left so you can view
LCD
8
Press to save the box's name.
ENTER
The shows briefly:
LCD
03:Sub-Address#
then it will show either:
_
The machine is asking for this
You must enter a subaddress here in order to use this
trying to fax to this -code box must know it.
F
To enter or change the subaddress number, proceed to step 9.
If you do not want to change an existing subaddress number, skip to step 10.
9
Use the numeric keypad to enter the exact subaddress for this
Note: The subaddress must be unique to this
-code box in this fax machine can have the same subaddress.
F
This - subaddress can be up to 20 characters in length and can include
ITU T
any combination of numbers and the * and # symbols (but no other non-
numerical characters). In this example, we enter 6 * 54321#.
6 * 54321#_
Note: To erase previously entered numbers, press
left. Or to change just one character in the number, press
the cursor to the left, or
Press to erase it. Then re-enter the number until it is just as
CANCEL
you want it.
10
Press to store it.
ENTER
Note: If you entered a sub-address number already being used by another
-code box, the machine will beep and briefly display the following:
F
Sub-Addr. In Use
The machine now returns you to step 9. Enter a different number for
your -code box's subaddress.
F
or 123456_
-code box's - subaddress.
F ITU T
-code box, and anyone
F
-code box.
F
-code box; i. e., no other
F
to erase to the
CANCEL
to move it to the right, to that character
to move