Muratec F-65 Operating Instructions Manual page 76

Fax dialing from the numeric keypad while using the
Note: If the mask feature is off, dial normally.
PIN
If you have specified Mode 1 — use "star" power
1
Insert the document in the feeder.
Adjust resolution and contrast if necessary.
2
Enter the fax number, then press the * ("star") key and enter the
The always goes last. For example, to dial 19725550911 with a
PIN
"1234", enter 19725550911 * 1234:
19725550911 * 1234
3
Press . The disappears from the display, and your machine dials the
START PIN
desired phone number.
If you specified Mode 2
1
Insert the document in the feeder.
Adjust resolution and contrast if necessary.
2
Enter the fax number.
19725550911_
3
Press . The now shows briefly:
START LCD
Enter PIN Number
and then it shows:
_
4
Use the numeric keypad to enter the
1234_
5
Press . Your machine will dial the number.
ENTER
mask
PIN
.
PIN
of
PIN
.
PIN
Dialing with a handset or on-hook dialing while using the
mask
Note: If the mask feature is off, dial normally.
PIN
If you specified Mode 1 and are dialing from the numeric keypad
1
Lifting a handset or activating the monitor speaker (by pressing
/ ).
MONITOR CALL
2
Enter the phone number, then press the * ("star") key and enter the
The always goes last. For example, to dial 19725550911 with a
PIN
"1234", enter 19725550911 * 1234:
19725550911 * 1234
If you specified Mode 2 and are dialing from the numeric keypad or either
using a one-touch key or speed-dial number
1
Lift a handset or press
MONITOR
2
Enter the phone number. Use either the numeric keypad, one-touch key or
speed-dial number.
19725550911_
3
Press the * ("star") key. (If you used either a one-touch key or speed-dial num-
ber, you don't need to press * ("star") key.) The
Enter PIN Number
and then it shows:
_
4
Use the numeric keypad to enter the
1234_
5
Press . Your machine will dial the number.
ENTER
If you specified Mode 1 or Mode 2 and are dialing using either one-touch a key
or speed-dial number
See "Autodialing while using the pin mask," page 2.40.
Beyond the basics
PIN
/ to turn on the monitor speaker).
CALL
now shows briefly:
LCD
.
PIN
PIN
.
PIN
of
2.41