Muratec F-65 Operating Instructions Manual page 44

10
Press to save the setting.
ENTER
The will display the next one-touch number.
LCD
If you do not want to enter any more one-touch numbers, press
If you do want to enter another one-touch number, go back to step 3.
If you do want to enter this one-touch number, go back to step 5.
One-touch fax dialing
Now that you have stored a one-touch number or two, let's discuss the ease of using
one-touch keys to make calls. To dial a fax call using a one-touch number:
1
Insert the document.
2
Adjust resolution and contrast if necessary.
3
Press the one-touch key in which you have stored the number. As the fax
machine dials, the shows the Location
LCD
Muratec Office
Note: If the number does not have a Location
The machine handles the call from here. What happens next will depend upon
whether you specified transmission from memory or transmission from the feeder.
(To review memory transmission, see page 1.17)
If you specified transmission from memory:
• Your fax machine scans your document into memory first, then dials the other
fax machine.
• When the other machine answers, your fax will transmit the document directly
from memory.
If you specified transmission from the feeder:
• Your fax machine dials the other fax machine.
• When the other machine answers, your fax feeds the document through its scan-
ner, transmitting as it goes.
4
At the end of the operation, your fax machine beeps and displays:
** Completed **
to finish.
STOP
.
ID
, the fax number appears.
ID
One-touch phone dialing
To dial a phone call using a one-touch number:
1
Obtain a dial tone by doing one of the following:
• Lifting the handset
• Press / to use the monitor speaker.
MONITOR CALL
** Tel Mode **
2
Press the one-touch key in which you have stored the number. As the
machine dials, it shows the number on the
9-1-555-9292039_
Note: Remember that your fax machine's monitor speaker is not a speakerphone.
If you dial using the monitor speaker, pick up the handset to speak to the
person that answers the call.
Note: You can also use this method to dial a fax call if you want to hear the other
machine's fax tones. If doing this, make sure there's a document in the
feeder. When you hear the fax tones from the other machine, press
send the document in the feeder. If you lifted the handset to make the call,
hang it up at this point.
Erasing a one-touch number
1
Press , , 2
PROGRAM A
Erase One-Touch
2
Press . The shows:
ENTER LCD
A :No Number
If is the key you want to erase, skip to step 4. (However, our examples from
A
here will say " " rather than "
B
3
Press the key for the one-touch number you want to erase.
Here, we select :
B
B :555-987-6543
4
If you change your mind and want to erase the number stored in a different
one-touch key, just press that key before going on step 5.
Beyond the basics
:
LCD
or A :555-345-6789
.")
A
to
START
2.9