Muratec F-65 Operating Instructions Manual page 70

Plain-paper fax machines
Table of Contents

Advertisement

9
Enter an
-
subaddress for the box to which you want to send the docu-
ITU
T
ment. The
-
subaddress can be up to 20 characters in length and can
ITU
T
include any combination of numbers and the * and # symbols. Do not include
other non-numerical characters.
In this example, we enter 6 * 54321#.
6 * 54321#_
10
Press
. The
will show briefly:
ENTER
LCD
Enter Password
_
Note: If you know that this
ITU
word, skip to step 12.
11
Enter an appropriate
-
password for the box. The
ITU
T
up to 20 characters in length and can include any combination of numbers
and the * and # symbols. Do not include other non-numerical characters). In
this example, we enter 1 * 23456#1.
1 * 23456#1_
Note: If you make a mistake, press
rect number.
When the entry is complete, press
12
If you want the transmission to begin immediately every time you press the
key, press
again and skip to step 15.
ENTER
If you want to delay the transmission (perhaps to take advantage of lower
phone rates), press
-
COM
OPTIONS
13
Instruct your fax to carry out this delayed command in one of the following
ways:
Option 1:
Perform the command once at a certain time on a certain day of
the month (For example, "Do this at 5:05 PM on the 30th.")
To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:
Time :
30/17:05
-
subaddress does not have an
-
T
ITU
T
-
password can be
ITU
T
to back up, then enter the cor-
CANCEL
.
ENTER
,
-
,
.
COM
OPTIONS
ENTER
Option 2:
14
Press
,
ENTER
15
The
now shows the next programmable one-touch key.
LCD
If you do not want to enter or change any other key's programming, press
to return your machine to its usual standby mode.
STOP
If you do want to enter or change another key's programming, go back to step
4.
pass-
Perform the command at a certain time each day you press the
key. (For example, "Do this at 5:05 PM today.")
To select this option, use the numeric keypad to enter 0, 0 (i. e.,
00), and then the time when the fax could perform the com-
mand:
Time :
00/17:05
.
ENTER
Beyond the basics
2.35

Advertisement

Table of Contents
loading

Table of Contents