Muratec F-65 Operating Instructions Manual page 47

Beyond the basics
Phoning via speed-dial
To dial a phone call using a speed-dial number:
1
Obtain a dial tone by doing one of the following:
• Lifting the handset
• Press / to use the monitor speaker
MONITOR CALL
** Tel Mode
2
Press /
SPEED DIAL TEL INDEX
S_
3
Use the numeric keypad to enter the two-digit identifier (such as 05, in this
example) for the speed-dial number you want to dial. The
9-1-555-9292039_
Note: Remember that your fax machine's monitor speaker is not a speakerphone.
If you dial by using the monitor speaker, pick up the handset to speak to the
person that answers the call.
Note: You can also use this method to dial a fax call if you want to hear the other
machine's fax tones. To do this, make sure there is a document in the
feeder.) When you hear those tones over either your handset or the monitor
speaker, press to send the document in the feeder. If you are using
START
the handset, hang it up at this point.
Erasing a speed-dial number
1
Press , , 2.
PROGRAM B
Erase Speed-Dial
2
Press . The shows:
ENTER LCD
01:No Number
If 01 is the speed-dial number you want to erase, skip to step 4. (However,
our examples from here will say "05" rather than "01.")
3
Use the numeric keypad to enter the two-digit identifier for the speed-dial
number you want to erase. Here, we select 05:
05:555-987-6543
2.12
**
. The shows:
LCD
LCD
or 01:555-584-6950
4
If you change your mind and want to erase a different speed-dial number,
repeat steps 3 through 5.
5
Press
Check Prog/Enter
Important: If you want to quit without erasing the speed-dial number you
6
Press
** Complete **
To erase another speed-dial number, repeat steps 3–6. Or press
the standby mode.
shows:
Printing a list of your speed-dial numbers
You can easily print a list of your speed-dial numbers. The list includes each number's
two-digit identifier, the Location
bers you may have stored.
To print the list, press
. The shows:
ENTER LCD
have selected, press
PROGRAM
to erase the number.
ENTER
, the phone or fax number and any group num-
ID
, , 3, .
PROGRAM B ENTER
. The fax will return to step 3.
to return to
STOP