4.2 Preparing Your System for an Expansion Box
If you plan to add an expansion box to your system, you must first remove
the SCSI cover and the terminator connected to the SCSI port.
1.
To remove the SCSI cover, place your fingers under the locking tab and
lift the cover to release it as shown in Figure 4-1.
Figure 4-1 : Removing the SCSI Cover
SCSI Cover
-----~
Lift Locking Tab
----.;--...=.,;....::::..!..-~-'t
to Release
MLO-002766
2. Remove the SCSI terminator. Figure 4-2 shows you how to remove the
terminator.
Expanding Your System 4-3