Table of Contents
Advertisement
2.7.1 Modifying FIS for Standalone Systems
If you intend to use your system as a standalone system, enter responses
to the prompts displayed as follows:
Do you want to enter Customer's cluster and password information
(Y IN)?
Y
I
Return
I
Will this node be a cluster member
(YIN)?
N
I
Return
I
Enter account passwords and press RETURN in response to the system
prompts as follows:
NOTE:
The passwords shown here are sample passwords. You should enter
your own unique passwords.
Enter new password for account SYSTEM:
PANCAKES
Reenter the password for account SYSTEM:
PANCAKES
%UAF-I-MDFYMSG, user record(s) updated
Enter new password for account SYSTEST:
BRATHWURST
Reenter the password for account SYSTEST:
BRATHWURST
%UAF-I-MDFYMSG, user record(s) updated
Enter new password for account FIELD:
ZIRHUMBA
Reenter the password for account FIELD:
ZIRHUMBA
%UAF-I-MDFYMSG, user recorq(s) updated
The procedure verifies the passwords.
Passwords which can be easily
guessed are rejected. If the passwords are acceptable, the following status
messages are displayed:
%VMS-I-PWD_OKAY, account password for SYSTEM verified
%VMS-I-PWD_OKAY, account password for SYSTEST verified
%VMS-I-PWD_OKAY, account password for FIELD verified
The following status message is then displayed:
Creating RIGHTS database file, SYS$SYSTEM:RIGHTSLIST.DAT
Ignore any messages of the following type:
%SYSTEM-F-DUPIDENT, duplicate identifier
When the procedure is completed, the following status is displayed:
%UAF-I-RDBDONEMSG, rights database modified
The system then reboots automatically to complete the configuration
changes. If the system default boot device name is incorrectly set, the
system may fail to reboot. In this case, use the system HALT button (see
Installing Your System
2-17
Advertisement
Table of Contents
Troubleshooting
