Tz30 Tape Drive Controls And Indicators - DEC MicroVAX 3100 Owner's Manual

Figure 3-2: TZ30 Tape Drive Controls and Indicators
Lever--------------~--------------_777~~~~
Write-Protect Light -------=-------::...:-~=-=-++----------------'-~:=__.:
Tape in Use Light --------=------------""-i::--:,.::.~--------------
Operate Lever Light --------;;------------------=~~-------------'
Unload Button _____
--=-____________________
--'=-~~-----J
MLO-002745
Table 3-3: TZ30 Controls
Control Function
Unload Button The unload button rewinds and disengages the tape from the take-
up reel inside the TZ30. The tape must be completely re-
wound and unloaded back into the cartridge before the car-
tridge can be removed from the drive.
Cartridge Lever
l
The cartridge lever is used to lock or unlock a tape car-
tridge. To insert a tape cartridge, the cartridge lever
must be in the unlock position. Once a cartridge is in-
serted and the green LED is on, move the cartridge
lever to the lock position. To eject the cartridge from
the drive, (only when the green LED is on or blink-
ing, and after the momentary beeper sounds), move the car-
tridge lever to the unlock position.
1
When using the cartridge lever, be sure it is completely positioned in the lock or un-
lock position before beginning the next operation.
Learning
About Your System 3-5