Removing A Tape Cartridge From The Drive; Inserting The Tape Cartridge - DEC MicroVAX 3100 Owner's Manual

Figure
3-3:
Inserting the Tape Cartridge
MLO-002746
3.1.2.4
Removing a Tape Cartridge from the Drive
To remove a tape cartridge, perform the following steps:
1. Press the unload button (Figure 3-4) or issue the appropriate system
software command. The yellow LED will flash as the tape rewinds.
Once the tape has rewound completely, the beeper sounds twice and
the green LED will light.
2. Move the cartridge lever to the unlock position.
3. The cartridge ejects and can be removed from the tape drive.
CAUTION:
Remove tape cartridges from the drive before turning off the
drive's power. Failure to do this can result in damage to the cartridge and
tape drive.
3-8
MicroVAX 3100 and VAXserver 3100 Owner's Manual