DEC MicroVAX 3100 Owner's Manual page 84

Figure
5-2: Halt Button
Halt Button ------.;--------~-~.,;..;_u
MLO-002754
3. Enter SHOW ETHERNET at the console prompt.
»>
SHOW ETHERNET
I
Return
I
The Ethernet hardware address is displayed in the following format:
1D XX-XX-XX-XX-XX-XX
For example:
1D 08-00-2B-07-A7-80
4. Write your Ethernet hardware address here:
Ethernet hardware address
You will need the hardware address for each system when you configure
the software for your system in a Local Area VAXcluster (LAVe).
5. Enter TEST 50 at the console prompt. If the last line of information in
the display is NI 0100.0001, then the Ethernet subsystem is working.
If a number between 0100.0002 and 0100.7000 appears on that line of
the display, there is a failure in the Ethernet subsystem.
If NI 0100.7000 or any number above 0100.7000 appears on this line,
check all Ethernet connections.
Connecting to a Network 5-5