Attaching A System-Unit-To-Expansion-Box Cable To The Scsi Connector On The System Unit - DEC Personal DECstation 5000 User Manual

6.4 To Connect an Expansion Box to the System Unit
Figure 6–2 Attaching a System-Unit-to-Expansion-Box Cable to the SCSI
Connector on the System Unit
Position the smaller
cable connector
so the widest part
is on top.
WSMXS091
.
4. Attach the free end of the system-unit-to-expansion-box cable to one of the
SCSI connectors (it doesn't matter which one) on the back of the expansion
box.
a. Press the two wire brackets on the expansion box connector away from
the connector.
b. Hold the cable connector so that its widest part is on top.
c. Push the cable connector into the expansion box connector as far as it
will go.
If the expansion box is a TK50Z tape drive, slide the cable connector up
between the handle and the back of the box.
d. Press the two wire brackets firmly against the sides of the cable
connector until they click into place.
External Storage Devices
SCSI icon
Base system
SCSI connector
External Storage Devices 6–7