DEC MicroVAX 3100 Owner's Manual page 168

- ""-< ............ ~" ....... - -
1
t
j
~
t
5. khe trocedure displays the following message:
t ,
iBACKUP-I-STARTVVERIFY, starting verification
*
pass
If a backup disk or only one backup tape, proceed to step 8.
6. If you have more than one backup tape cartridge, the procedure displays
the following message:
%BACKUP-I-RESUME, Resuming operation on volume 2
%BACKUP-I-READYWRITE, 'Mount volume 2 on MUXX: for reading
Enter "YES" when ready:
Remcve the backup tape cartridge from the drive. Insert the next
backup tape cartridge in the drive, type Y (for YES) and press RETURN.
Each time you receive a mount request, repeat this step.
7. When the procedure is finished, it displays the following message:
%BACKUP-I-PROCDONE, operation completed.
Processing finished at 19-APR-1990 15:00:00.00
If you do not want to perform another standalone BACKUP
operation, use the console to halt the system.
If you do not want to perform another standalone BACKUP
operation, ensure the standalone application volume is
online and ready.
Enter "YES" to continue:
8. Press the Halt button.
9. Reboot the system.
~-
..
-----
::\J
t:oc~\lfl
j
:ryY\~e
)
loG
A
Backup Procedures G-11