Compact Disc Caddy - DEC MicroVAX 3100 Owner's Manual

2. Press down on each of the locking tabs while slightly separating the
housing from the sleeve. Use your fingernail or a sharp, pointed
instrument.
3. When both tabs have been disengaged, pull the disc housing out to
about the midpoint of the disc.
4. Hold the disc housing on each side. Exert inward pressure on the
housing so the disc will not fall out. Remove the sleeve from the
housing. Place the sleeve aside.
5. Hold the disc with your free hand as shown in Figure F-6. Position
your thumb on the outer edge of the disc and your index finger in the
center hole of the disc. Release pressure from the housing and remove
the disc.
F.3.2 How to Insert a Compact Disc Into a Caddy
A compact disc is contained inside a protective caddy for insertion into the
compact disc drive. The caddy consists of three parts: the disc, the housing,
and the transparent sleeve as shown in Figure F -5.
Figure F-5: Compact Disc Caddy
Locking Tabs - - - - - - - - - - - - - - - - . . . - - - - - - - - . . .
Housing ----------------~c::::=:::::::::::<:::_~
Disc - - - - - - - - - - - - - ; ; , - s - : : ' - - - - - \
Transparent Sleeve
F-8
MicroVAX 3100 and VAXserver 3100 Owner's Manual