Setting The Default Boot ~'Lags; Mop, Trig And Pswd Commands - DEC MicroVAX 3100 Owner's Manual

The value for the default recovery action appears:
2
»>
3. To set the recovery action to automatic restart should the system go
down, at the
(»»
prompt, enter:
»>
SET HALT 1
I
Return
I
»>
4. To change to automatic reboot, at the
(»»
prompt, enter:
»>
SET HALT 2
I
Return
I
»>
5. If you want your system to halt after every time you tum it on, at the
console prompt
(»»,
enter:
»>
SET HALT 3
I
Return
I
»>
A.1.3 Setting the Default Boot Flags
Default boot flags (used in specialized startup procedures) should be set for
the operating system installed on your MicroVAX 3100 or VAXserver 3100
system. See your operating system documentation for more information.
To set the default boot flags:
1. Ensure the system is in console mode. If the
(> >
» prompt does not
appear on the screen, press the Halt button on the back of the system
unit.
2. Determine the default boot flag number (a hexadecimal number of up to
eight characters) from your operating system software documentation.
3. Set the default boot flags for your operating system. At the
(»»
prompt, enter:
> > >
SET BFLG
I
Return
I
»>
A.2 MOP, TRIG and PSWD Commands
If the VAXserver 3100 is to be used as the server and operating system
resource for members of a work group, the system manager can tell the
server to boot the satellites from the server console without having to go to
each satellite and boot them manually.
A-4 MicroVAX 3100 and VAXserver 3100 Owner's Manual