7.7
User Management Functions
The following settings can be specified or operations can be performed
from the User Management screen.
G
Confirmation beep volume
G
Alarm beep volume
G
Line Monitor volume
G
Touch panel cleaning
G
Dehumidifying
G
Toner replenishing
G
Print Management
To adjust beep volumes ("Confirmation Beep", "Alarm Volume" and
"Line Monitor Volume" functions)
You can adjust the volume of the electronic beep used when pressing a
key on the machine, or beeps issued to indicate alarms.
The following procedure describes how to adjust the volumes of three
types of beeps. Additionally, beep volumes can be easily adjusted per
user. Refer to "To change the volume of touch panel beeps and alarms
("Sound Setting" function)" on page 4-7.
[CONFIRMATION BEEP]: This function is used to adjust the volume
of the beep that is sounded when a touch panel button is touched.
(Default setting: 3)
[ALARM VOLUME]: This function is used to adjust the volume of the
alarm that is sounded when a paper misfeed occurs or an incorrect
operation is specified. (Default setting: 3)
[LINE MONITOR VOLUME]: This function is used to adjust the volume
of the telephone line that can be heard through the speaker. (Initial
value: 3)
7-40
Utility Mode Operations
Di2510f/Di3510f