Selecting The Transition Type By A Menu Operation - Sony MVS-6000 User Manual
Multi format switcher system
with ccp-9000 series center control panel
Hide thumbs
Also See for MVS-6000:
- User manual (37 pages) ,
- Operation manual (18 pages) ,
- User manual (262 pages)
Table of Contents
Advertisement
Selecting the Transition Type by a Menu
Operation
You can also select the required transition type by a menu operation.
1
2
114
Selecting the Transition Type by a Menu Operation
In the M/E or PGM/PST menu, select first VF7 'Misc,' then HF1
'Transition.'
The Transition menu appears.
Select the required transition type in the <Transition Type> group.
The parameter settings can now be adjusted with the knobs according to
the selected transition type.
For details, see the following.
• "Super Mix Settings" (page 115)
• "Color Matte Settings" (page 116)
• "Setting the Transition Rate" (page 120)
Note
When multi-program mode is selected in the Setup menu (see "Settings for
Switcher Configuration (Config Menu)" in Chapter 20 (Volume 3)), there
may be cases in which two or more transition types have been selected.
Advertisement
Table of Contents
