ZyWALL Series Internet Security Gateway
The following table describes the labels in this screen.
LABEL
IP Alias 1,2
IP Address
IP Subnet Mask
RIP Direction
5-8
Figure 5-5 IP Alias
Table 5-3 IP Alias
Select the check box to configure another LAN network for the ZyWALL.
Enter the IP address of your ZyWALL in dotted decimal notation.
Your ZyWALL will automatically calculate the subnet mask based on the IP address
that you assign. Unless you are implementing subnetting, use the subnet mask
computed by the ZyWALL.
RIP (Routing Information Protocol, RFC1058 and RFC 1389) allows a router to
exchange routing information with other routers. The RIP Direction field controls the
sending and receiving of RIP packets. Select the RIP direction from Both/In
Only/Out Only/None. When set to Both or Out Only, the ZyWALL will broadcast its
routing table periodically. When set to Both or In Only, it will incorporate the RIP
information that it receives; when set to None, it will not send any RIP packets and
will ignore any RIP packets received.
DESCRIPTION
LAN Screens