Figure 35-2 Ftp Session Example; Table 35-2 General Commands For Gui-Based Ftp Clients - ZyXEL Communications ZyWall 10W User Manual

ZyWALL Series Internet Security Gateway
Step 6. Use "get" to transfer files from the ZyWALL to the computer, for example, "get rom-0
config.rom" transfers the configuration file on the ZyWALL to your computer and renames it
"config.rom". See earlier in this chapter for more information on filename conventions.
Step 7. Enter "quit" to exit the ftp prompt.
35.3.3 Example of FTP Commands from the Command Line
35.3.4 GUI-based FTP Clients
The following table describes some of the commands that you may see in GUI-based FTP clients.

Table 35-2 General Commands for GUI-based FTP Clients

COMMAND
Host Address
Login Type
Transfer Type
Initial Remote Directory
35-4
331 Enter PASS command
Password:
230 Logged in
ftp> bin
200 Type I OK
ftp> get rom-0 zyxel.rom
200 Port command okay
150 Opening data connection for STOR ras
226 File received OK
ftp: 16384 bytes sent in 1.10Seconds 297.89Kbytes/sec.
ftp> quit

Figure 35-2 FTP Session Example

Enter the address of the host server.
Anonymous.
This is when a user I.D. and password is automatically supplied to the server
for anonymous access. Anonymous logins will work only if your ISP or service
administrator has enabled this option.
Normal.
The server requires a unique User ID and Password to login.
Transfer files in either ASCII (plain text format) or in binary mode.
Configuration and firmware files should be transferred in binary mode.
Specify the default remote directory (path).
DESCRIPTION
Firmware and Configuration File Maintenance