ZyWALL Series Internet Security Gateway
LABEL
Old Password
New Password
Retype to Confirm
Apply
Reset
4.7
Configuring Time Setting
To change your ZyWALL's time and date, click SYSTEM, then the Time Setting tab. The screen appears as
shown. Use this screen to configure the ZyWALL's time based on your local time zone.
The following table describes the labels in this screen.
4-6
Table 4-3 Password
Type the default password or the existing password you use to access the system
in this field.
Type the new password in this field.
Type the new password again in this field.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Figure 4-4 Time Setting
DESCRIPTION
System Screens