Using Syslog; Using Ip Alias - ZyXEL Communications P-793H v2 Support Notes

Trap
Enter the IP address of the NMS that you w ish to send the traps to. If
Destination
0.0.0.0 is entered, the P-793H v2w ill not send trap any NMS m anager.
Note: You may need to edit a firewall rule to permit SNMP

12. Using syslog

You can configure it in Web Configurator, Advanced Setup, Maintenance ->
Logs -> Log Settings -> Syslog logging.
Key Settings:
Active: Select it to active UNIX Syslog.
Syslog IP Address: Enter the IP address of the UNIX server that you wish to
send the syslog.
Log Facility: Select from the 7 different local options. The log facility lets you
log the message in different server files. Refer to your UNIX manual.

13. Using IP Alias

What is IP Alias?
In a typical environment, a LAN router is required to connect two local
networks. The P-793H v2can connect three local networks to the ISP or a
remote node, we call this function as 'IP Alias'. In this case, an internal router is
not required. For example, the network manager can divide the local network
into three networks and connect them to the Internet using P-793H v2's single
user account. See the figure below.
All contents copy right © 2010 Zy XEL Communications Corporation.
P-793H v 2 Support Notes
Packets.
68