Figure 36-2 Valid Commands; Table 36-1 Valid Commands - ZyXEL Communications ZyWall 10W User Manual

ZyWALL Series Internet Security Gateway
36.1.1 Command Syntax
The command keywords are in courier new font.
Enter the command keywords exactly as shown, do not abbreviate.
The required fields in a command are enclosed in angle brackets <>.
The optional fields in a command are enclosed in square brackets [].
The |symbol means "or".
For example,
sys filter netbios config <type> <on|off>
means that you must specify the type of netbios filter and whether to turn it on or off.
36.1.2 Command Usage
A list of commands can be found by typing help or ? at the command prompt. Always type the full
command. Type exit to return to the SMT main menu when finished.
Copyright (c) 1994 - 2003 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys
ipsec
8021x
COMMAND
sys The system commands display device information and configure device settings.
exit This command returns you to the SMT main menu.
ether These commands display Ethernet information and configure Ethernet settings.
ip These commands display IP information and configure IP settings.
ipsec These commands display IPSec information and configure IPSec settings.
36-2
exit ether
bridge bm
radius

Figure 36-2 Valid Commands

Table 36-1 Valid Commands

ip
certificates
DESCRIPTION
System Maintenance & Information