The following table describes the labels in this screen.
LABEL
Service Name
Service Type
Port Configuration
Type
Port Number
Apply
Cancel
12.8.4 Bandwidth for Traffic that Does Not Match Firewall Rules
Use one of the following methods to configure the ZyWALL to allow bandwidth for traffic that does not
match firewall rules with bandwidth management enabled.
1. Set the bandwidth management global WAN port speed to less than the speed of the broadband
device connected to the WAN port.
2. Configure the firewall rules so that the sum of their bandwidth allotments is less than or equal to the
bandwidth management global setting.
Firewall Screens
Figure 12-9 Custom Port Create/Edit
Table 12-5 Custom Port Create/Edit
Enter a unique name for your custom port.
Choose the IP port (TCP, UDP or Both) that defines your customized port from the
drop down list box.
Click Single to specify one port only or Range to specify a span of ports that define
your customized service.
Enter a single port number or the range of port numbers that define your customized
service.
Click Apply to save your customized settings and exit this screen.
Click Cancel to exit this screen without saving,
ZyWALL Series Internet Security Gateway
DESCRIPTION
12-15