ZyWALL Series Internet Security Gateway
TRAP #
6b
For fatal error :
18.14.3
REMOTE MANAGEMENT: SNMP
To change your ZyWALL's SNMP settings, click REMOTE MANAGEMENT, then the SNMP tab. The
screen appears as shown.
The following table describes the labels in this screen.
LABEL
SNMP
Configuration
18-26
Table 18-5 SNMP Traps
TRAP NAME
Figure 18-22 SNMP
A trap is sent with the message of the fatal code if the
system reboots because of fatal errors.
Table 18-6 SNMP
DESCRIPTION
DESCRIPTION
Remote Management Screens