Ip Alias; Figure 3-3 Physical Network; Figure 3-4 Partitioned Logical Networks; Table 3-2 Lan Tcp/Ip Setup Menu Fields - ZyXEL Communications Prestige 316 User Manual

Prestige 316 Broadband Sharing Gateway / Wireless LAN
FIELD
TCP/IP Setup
IP Address Enter the IP address of your Prestige in dotted decimal notation.
IP Subnet Mask Your Prestige will automatically calculate the subnet mask based
RIP Direction Press [space bar] to select the RIP direction from Both/In Only/
Version Press [space bar] to select the RIP version from RIP-1/RIP-2B/
Multicast Turn on/off IGMP support by selecting from IGMP-v2/IGMP-v1/
Edit IP Alias Toggle [space bar] to choose Yes or No.
When you have completed this menu, press [Enter] at the prompt [Press ENTER to Confirm...] to save
your configuration, or press [Esc] at any time to cancel.
3.3

IP Alias

IP Alias allows you to partition a physical network into different logical networks over the same Ethernet
interface. The Prestige supports three logical LAN interfaces via its single physical Ethernet interface with
the Prestige itself as the gateway for each LAN network.

Figure 3-3 Physical Network

Use Menu 3.2.1 to configure IP Alias on your Prestige.
3-6
Table 3-2
on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the Prestige.
Out Only/None.
RIP-2M.
None.
LAN TCP/IP Setup Menu Fields
DESCRIPTION

Figure 3-4 Partitioned Logical Networks

EXAMPLE
192.168.1.1
(default)
255.255.255.0
Both (default)
RIP-2B (default)
None (default)
No (default)
Internet Access