Configuring Ip; Figure 5-1 Ip; Table 5-1 Ip - ZyXEL Communications ZyWall 10W User Manual

5.4

Configuring IP

Click LAN to open the IP screen.
The following table describes the labels in this screen.
LABEL
DHCP Server
IP Pool Starting
Address
LAN Screens
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows
individual clients (computers) to obtain TCP/IP configuration at startup from a server.
Leave the DHCP Server check box selected unless your ISP instructs you to do
otherwise. Clear it to disable the ZyWALL acting as a DHCP server. When
configured as a server, the ZyWALL provides TCP/IP configuration for the clients. If
not, DHCP service is disabled and you must have another DHCP server on your
LAN, or else the computers must be manually configured. When set as a server, fill
in the rest of the DHCP setup fields.
This field specifies the first of the contiguous addresses in the IP address pool.
ZyWALL Series Internet Security Gateway

Figure 5-1 IP

Table 5-1 IP

DESCRIPTION
5-3