Figure 30-13 Menu 15.2: Specifying An Inside Server; Figure 30-12 Nat Example 2 - ZyXEL Communications ZyWall 10W User Manual

ZyWALL Series Internet Security Gateway
30.4.2 Example 2: Internet Access with an Inside Server
The dynamic Inside Global Address is assigned by the ISP.
In this case, you do exactly as above (use the convenient pre-configured SUA Only set) and also go to
menu 15.2 to specify the Inside Server behind the NAT as shown in the next figure.
30-12

Figure 30-12 NAT Example 2

Menu 15.2 - NAT Server Setup
Rule Start Port No.
---------------------------------------------------
1. Default
2. 0
3. 0
4. 0
5. 0
6. 0
7. 0
8. 0
9. 0
10. 0
11. 0
12. 0
Press ENTER to Confirm or ESC to Cancel:

Figure 30-13 Menu 15.2: Specifying an Inside Server

End Port No. IP Address
Default 192.168.1.10
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
NAT