Ike Setup - ZyXEL Communications ZyWall 10W User Manual

ZyWALL Series Internet Security Gateway
FIELD
Key Press [SPACE BAR] to choose either IKE or Manual and then press
Management [ENTER]. Manual is useful for troubleshooting if you have problems using
IKE key management.
Edit Key Press [SPACE BAR] to change the default No to Yes and then press
Management [ENTER] to go to a key management menu for configuring your key
Setup management setup (described later). If you set the Key Management field
to IKE, this will take you to Menu 27.1.1.1 – IKE Setup. If you set the Key
Management field to Manual, this will take you to Menu 27.1.1.2 –
Manual Setup.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to save
your configuration, or press [ESC] at any time to cancel.

40.4 IKE Setup

To edit this menu, the Key Management field Menu 27.1.1 – IPSec Setup must be set to IKE. Move the
cursor to the Edit Key Management Setup field in Menu 27.1.1 – IPSec Setup; press [SPACE BAR] to
select Yes and then press [ENTER] to display Menu 27.1.1.1 – IKE Setup.
40-12
Table 40-2 Menu 27.1.1: IPSec Setup
Menu 27.1.1.1 - IKE Setup
Phase 1
Negotiation Mode= Main
Authentication Method= Pre-Shared Key
Pre-Shared Key =
Certificate=
Encryption Algorithm = DES
Authentication Algorithm = SHA1
SA Life Time (Seconds)= 28800
Key Group= DH1
Phase 2
Active Protocol = ESP
Encryption Algorithm
Authentication Algorithm
SA Life Time (Seconds)= 28800
Encapsulation = Tunnel
Perfect Forward Secrecy (PFS)= None
Press ENTER to Confirm or ESC to Cancel:
Figure 40-5
DESCRIPTION
= DES
= SHA1
Menu 27.1.1.1: IKE Setup
EXAMPLE
IKE
No
VPN/IPSec Setup