ZyXEL Communications ZyWall 10W User Manual page 291

LABEL
Port Number
Key
Accounting Server
Active
Server Address
Port Number
Key
Apply
Reset
Authentication Server
Table 17-2 RADIUS
The default port of the RADIUS server for authentication is 1812.
You need not change this value unless your network administrator instructs you
to do so with additional information.
Enter a password (up to 31 alphanumeric characters) as the key to be shared
between the external authentication server and the access points.
The key is not sent over the network. This key must be the same on the external
authentication server and ZyWALL.
Enable this feature to do user accounting through an external authentication
server.
Enter the IP address of the external accounting server in dotted decimal notation.
The default port of the RADIUS server for accounting is 1813.
You need not change this value unless your network administrator instructs you
to do so with additional information.
Enter a password (up to 31 alphanumeric characters) as the key to be shared
between the external accounting server and the access points.
The key is not sent over the network. This key must be the same on the external
accounting server and ZyWALL.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
ZyWALL Series Internet Security Gateway
DESCRIPTION
17-7