ZyXEL Communications ZyWall 10W User Manual page 627

FUNCTION
config edit firewall set <set
#> rule <rule #> destaddr-range
<start ip address> <end ip
address>
config edit firewall set <set
#> rule <rule #> TCP destport-
single
config edit firewall set <set
#> rule <rule #> TCP destport-
range <start port #> <end port
#>
config edit firewall set <set
#> rule <rule #> UDP destport-
single
config edit firewall set <set
#> rule <rule #> UDP destport-
range <start port #> <end port
#>
D e l e t e
D e l e t e
config delete firewall e-mail
config delete firewall attack
Firewall Commands
Chart O-1 Firewall Commands
COMMAND
<port #>
<port #>
ZyWALL Series Internet Security Gateway
DESCRIPTION
This command sets a rule to have the
ZyWALL check for traffic going to this range of
addresses.
This command sets a rule to have the
ZyWALL check for TCP traffic with this
destination address. You may repeat this
command to enter various, non-consecutive
port numbers.
This command sets a rule to have the
ZyWALL check for TCP traffic with a
destination port in this range.
This command sets a rule to have the
ZyWALL check for UDP traffic with this
destination address. You may repeat this
command to enter various, non-consecutive
port numbers.
This command sets a rule to have the
ZyWALL check for UDP traffic with a
destination port in this range.
This command removes all of the settings for
e-mail alert.
This command resets all of the attack
response settings to their defaults.
O-7