Resetting The Zywall; Figure 2-2 Replace Certificate Screen - ZyXEL Communications ZyWall 10W User Manual

ZyWALL Series Internet Security Gateway
Step 6.
Click Apply in the Replace Certificate screen to create a certificate using your ZyWALL's
MAC address that will be specific to this device.
Step 7. You should now see the MAIN MENU screen (see Figure 2-4).
The management session automatically times out when the time period set in the
Administrator Inactivity Timer field expires (default five minutes). Simply log back into
2.3

Resetting the ZyWALL

If you forget your password or cannot access the web configurator, you will need to reload the factory-
default configuration file or use the RESET button the back of the ZyWALL. Uploading this configuration
file replaces the current configuration file with the factory-default configuration file. This means that you
will lose all configurations that you had previously and the speed of the console port will be reset to the
default of 9600bps with 8 data bit, no parity, one stop bit and flow control set to none. The password will be
reset to "1234", also.
2.3.1 Procedure To Use The Reset Button
Make sure the SYS LED is on (not blinking) before you begin this procedure.
Step 1. Press the RESET button for ten seconds, and then release it. If the SYS LED begins to blink, the
defaults have been restored and the ZyWALL restarts. Otherwise, go to step 2.
2-2

Figure 2-2 Replace Certificate Screen

the ZyWALL if this happens to you.
Introducing the Web Configurator