ZyXEL Communications ZyWall 10W User Manual page 47

LINK
FTP
SNMP
DNS
Security
UPnP UPnP
Ports
LOGS View Log
Log Settings
Reports
MAINTENANCE General
DHCP Table
F/W Upload
Configuration
Restart
LOGOUT
Introducing the Web Configurator
Table 2-1Web Configurator Screens Summary
TAB
Use this screen to configure through which interface(s) and from
which IP address(es) users can use FTP to access the ZyWALL.
Use this screen to configure your ZyWALL's settings for Simple
Network Management Protocol management.
Use this screen to configure through which interface(s) and from
which IP address(es) users can send DNS queries to the ZyWALL.
Use this screen to set whether or not the ZyWALL responds to ICMP
pings and/or requests for unauthorized services.
Use this screen to enable UPnP on the ZyWALL.
Use this screen to view the NAT port mapping rules that UPnP
creates on the ZyWALL.
Use this screen to view the logs for the categories that you selected.
Use this screen to change your ZyWALL's log settings.
Use this screen to have the ZyWALL record and display the network
usage reports.
This screen contains administrative and system-related information.
This screen shows current DHCP client information on all network
clients using the DHCP server.
Use this screen to upload firmware to your ZyWALL
Use this screen to backup and restore the configuration or reset the
factory defaults to your ZyWALL.
This screen allows you to reboot the ZyWALL without turning the
power off.
Click this label to exit the web configurator.
ZyWALL Series Internet Security Gateway
FUNCTION
2-7