ZyXEL Communications ZyWall 10W User Manual page 646

ZyWALL Series Internet Security Gateway
LOG MESSAGE
board %d line %d channel
%d, call %d, %s C01
Outgoing Call dev=%x ch=%x
%s
board %d line %d channel
%d, call %d, %s C02 OutCall
Connected %d %s
board %d line %d channel
%d, call %d, %s C02 Call
Terminated
LOG MESSAGE
ppp:LCP Starting
ppp:LCP Opening
ppp:CHAP Opening
ppp:IPCP Starting
ppp:IPCP Opening
ppp:LCP Closing
ppp:IPCP Closing
S-6
Chart S-7 CDR Logs
The router received the setup requirements for a call. "call" is the
reference (count) number of the call. "dev" is the device type (3 is
for dial-up, 6 is for PPPoE, 10 is for PPTP). "channel" or "ch" is
the call channel ID.
For example,
"board 0 line 0 channel 0, call 3, C01 Outgoing Call dev=6 ch=0 "
Means the router has dialed to the PPPoE server 3 times.
The PPPoE, PPTP or dial-up call is connected.
The PPPoE, PPTP or dial-up call was disconnected.
Chart S-8 PPP Logs
The PPP connection's Link Control Protocol stage has
started.
The PPP connection's Link Control Protocol stage is
opening.
The PPP connection's Challenge Handshake
Authentication Protocol stage is opening.
The PPP connection's Internet Protocol Control Protocol
stage is starting.
The PPP connection's Internet Protocol Control Protocol
stage is opening.
The PPP connection's Link Control Protocol stage is
closing.
The PPP connection's Internet Protocol Control Protocol
stage is closing.
DESCRIPTION
DESCRIPTION
Log Descriptions