Configuring Reports - ZyXEL Communications ZyWall 10W User Manual

ZyWALL Series Internet Security Gateway
LABEL
Log
Send Immediate Alert
Apply
Reset

20.3 Configuring Reports

The Reports screen displays which computers on the LAN send and receive the most traffic, what kinds of
traffic are used the most and which web sites are visited the most often. Use the Reports screen to have the
ZyWALL record and display the following network usage details:
Web sites visited the most often
Number of times the most visited web sites were visited
The most-used protocols or service ports
The amount of traffic for the most used protocols or service ports
The LAN IP addresses to and/or from which the most traffic has been sent
How much traffic has been sent to and from the LAN IP addresses to and/or from which the most
traffic has been sent
The web site hit count may not be 100% accurate because sometimes when an
individual web page loads, it may contain references to other web sites that also
The ZyWALL records web site hits by counting the HTTP GET packets. Many web sites include HTTP
GET references to other web sites and the ZyWALL may count these as hits, thus the web hit count is not
(yet) 100% accurate.
To view your ZyWALL's log reports, click Logs, then the Reports tab. The screen appears as shown.
20-6
Table 20-2 Log Settings Screen
Select the categories of logs that you want to record. Logs include alerts.
Select the categories of alerts for which you want the ZyWALL to instantly e-mail
alerts to the e-mail address specified in the Send Alerts To field.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
get counted as hits.
DESCRIPTION
Log Screens