Figure 7-1 Dmz (Zywall 100) - ZyXEL Communications ZyWall 10W User Manual

ZyWALL Series Internet Security Gateway
The following table describes the labels in this screen.
LABEL
DMZ TCP/IP
IP Address
IP Subnet Mask
RIP Direction
7-2

Figure 7-1 DMZ (ZyWALL 100)

Type the IP address of your ZyWALL in dotted decimal notation 192.168.1.1
(factory default).
The subnet mask specifies the network number portion of an IP address. Your
ZyWALL will automatically calculate the subnet mask based on the IP address that
you assign. Unless you are implementing subnetting, use the subnet mask
computed by the ZyWALL 255.255.255.0.
RIP (Routing Information Protocol, RFC1058 and RFC 1389) allows a router to
exchange routing information with other routers. The RIP Direction field controls
the sending and receiving of RIP packets. Select the RIP direction from Both/In
Only/Out Only/None. When set to Both or Out Only, the ZyWALL will broadcast
its routing table periodically. When set to Both or In Only, it will incorporate the RIP
information that it receives; when set to None, it will not send any RIP packets and
will ignore any RIP packets received. Both is the default.
Table 7-1 DMZ
DESCRIPTION
DMZ Screens