ZyWALL Series Internet Security Gateway
Figure 8-6 MAC Setup
The MAC address screen allows users to configure the WAN port's MAC Address by either using the factory
default or cloning the MAC address from a computer on your LAN. Choose Factory Default to select the
factory assigned default MAC Address.
Otherwise, click Spoof this computer's MAC address - IP Address and enter the IP address of the
computer on the LAN whose MAC you are cloning. Once it is successfully configured, the address will be
copied to the rom file (ZyNOS configuration file). It will not change unless you change the setting or upload
a different ROM file.
8.7
Traffic Redirect
Traffic redirect forwards WAN traffic to a backup gateway when the ZyWALL cannot connect to the
Internet through its normal gateway. Connect the backup gateway on the WAN so that the ZyWALL still
provides firewall protection. This feature is not available on all models.
Figure 8-7 Traffic Redirect WAN Setup
8-12
WAN Screens