Step 2.
Enter "ssh –1 192.168.1.1". This command forces your computer to connect to the
ZyWALL using SSH version 1. If this is the first time you are connecting to the ZyWALL using
SSH, a message displays prompting you to save the host information of the ZyWALL. Type
"yes" and press [ENTER].
Then enter the password to log in to the ZyWALL.
$ ssh –1 192.168.1.1
The authenticity of host '192.168.1.1 (192.168.1.1)' can't be established.
RSA1 key fingerprint is 21:6c:07:25:7e:f4:75:80:ec:af:bd:d4:3d:80:53:d1.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.1.1' (RSA1) to the list of known hosts.
Administrator@192.168.1.1's password:
Step 3.
The SMT main menu displays next.
18.10 Secure FTP Using SSH Example
This section shows an example on file transfer using the OpenSSH client program. The configuration and
connection steps are similar for other SSH client programs. Refer to your SSH client program user's guide.
Step 1.
Enter "sftp –1 192.168.1.1". This command forces your computer to connect to the
ZyWALL for secure file transfer using SSH version 1. If this is the first time you are connecting
to the ZyWALL using SSH, a message displays prompting you to save the host information of the
ZyWALL. Type "yes" and press [ENTER].
Step 2.
Enter the password to login to the ZyWALL.
Step 3.
Use the "put" command to upload a new firmware to the ZyWALL.
Remote Management Screens
Figure 18-16 SSH Example 2: Log in
ZyWALL Series Internet Security Gateway
18-19