Table of Contents
Advertisement
If you click Add new static lease in the Static DHCP screen, the following screen displays.
Figure 50 Static DHCP: Add
The following table describes the labels in this screen.
Table 27 Static DHCP: Add
LABEL
MAC Address
IP Address
Apply
Cancel
7.4 The IP Alias Screen
IP alias allows you to partition a physical network into different logical networks over the same
Ethernet interface. The Device supports multiple logical LAN interfaces via its physical Ethernet
interface with the Device itself as the gateway for the LAN network.
When you use IP alias, you can also configure firewall rules to control access to the LAN's logical
network (subnet).
Use this screen to change your Device's IP alias settings. Click Network Setting > Home
Networking > IP Alias to open the following screen.
Figure 51 Network Setting > Home Networking > IP Alias
VMG1312-T10C User's Guide
DESCRIPTION
Enter the MAC address of a computer on your LAN.
Enter the IP address that you want to assign to the computer on your LAN with
the MAC address that you will also specify.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
Chapter 7 Home Networking
91
Advertisement
Table of Contents
